How to monitor, measure, and manage your broadband consumption

Dealing with a data cap? Tired of getting dinged for busting through it? Learn how to identify the hogs on your network and how to make sure your ISP is delivering everything you’re paying for.

Speed gauge
Credit: ThinkStock

Forget that bass; in the digital world, it’s all about that bandwidth. You’re paying your ISP for a given amount of bandwidth, but it’s up to you to manage how it’s consumed. Whether or not you have a data cap—and even if your data cap is high enough that you never bang into it—simply letting all the devices on your network engage in a battle for supremacy is a recipe for problems.

You could experience poor video streaming, choppy VoIP calls, or debilitating lag in your online gaming sessions. And if you do have a data cap (and yes, they are evil), blowing through it can hit you in the pocketbook, expose you to throttling (where your ISP drastically, if temporarily, reduces your connection speed), or both.

Those are the problems, here are the solutions: We’ll show you how you can keep your ISP honest by measuring your Internet connection speed, so you can make sure you’re getting what you’re paying for; we’ll help you identify any bandwidth hogs on your network, so you can manage their consumption; and we’ll show you how you can tweak your router to deliver the best performance from everything on your home network.

Make sure you’re getting what you paid for

Your home network will most certainly be faster than your Internet connection, but it’s the speed of your Internet connection that will have the biggest impact on your media-streaming experience—at least when you’re streaming media from services such as Netflix, Amazon Video, Spotify, Tidal, and the like. So the first step in your bandwidth audit should be to verify that your ISP is delivering the speed you’re paying for (the vast majority of ISPs offer their services in tiers, charging more for higher speeds.

Speedtest

Results from Speedtest.net for my home connection.

The best way to do that is by visiting a third-party website such as Ookla’s Speedtest.net or—if you don’t like Flash—the HTML 5-based Speedof.me. To get accurate baseline speeds, check from a device that’s connected directly to your broadband gateway (i.e., your DSL or cable modem, not your router), with all other wired and wireless devices disconnected. You might even want to test a couple of times at different hours of the day, since speeds can vary. Additionally, run some tests while other devices are using the Internet to see the differences.

Compare your baseline results to the speeds your ISP has committed to deliver with the plan you’re paying for. If you’re seeing significantly lower speeds, call your provider ask them to check your connection. They might be able to run some diagnostics at their end and offer some suggestions to fix the problem before they send out a tech.

You also want to check the Internet speeds from any device you’re seeing performance issues on. Devices that are hardwired into the network should achieve speeds on par with your baseline if other devices on the network aren’t using much bandwidth. On wireless devices, the speeds can be greatly reduced when further away from the wireless router or if there’s interference from neighboring Wi-Fi networks, other wireless devices, or appliances that can cause interference (such as microwave ovens, which produce tremendous amounts of noise in the 2.4GHz frequency spectrum while operating).

How much bandwidth do you really need?

Keep in mind, the bandwidth your ISP promises to deliver isn’t a per-device ceiling—it’s the total bandwidth available for your Internet connection, so it’s shared among all the devices on your network. If you have a plan offering download speeds of 20Mbps and upload speeds of 1.0Mbps, for instance, and you have four devices connected to the Internet, you could say each device might see a maximum download speed of 5.0Mbps and a maximum upload speed of 0.25Mbps.

In reality, it’s not quite that simple. The manner in which your Internet bandwidth is distributed depends on your router and the demand from each device. With a simple router with factory-default settings, it’s every client device for itself in a mad scramble for bandwidth. Client devices that are sensitive to lag—media streamers, VoIP phones, and online games—can suffer in this scenario because applications that aren’t sensitive to lag—web browsers and email clients, for example—are treated the same as one that are. I’ll show you how you can manage your bandwidth later.

WRT1900ACS front

If you don't configure your router properly, all the devices on your network will be treated equally in terms of bandwidth allocation.

To give you an idea of what’s acceptable for Internet speeds, I suggest having about 2.0Mbps of download speed per device for general usage (emailing and web browsing), and about 5.0Mbps of download speed for each HD video stream. So if one person on your network is watching YouTube videos, another is streaming a movie from Netflix, both are simultaneously using a tablet or smartphone to browse the web, while another is a on Skype video chat, I suggest having 19 Mbps of download bandwidth: that’s 5.0Mbps x 3 + 2.0Mbps x 2.

The maximum upload speed of your Internet connection typically isn’t as crucial, because most people consume more content than they create and upload to the Internet. That’s a good thing given that most ISPs deliver asymmetric service (i.e., download speeds that are much higher than upload speeds). Having said that, know that the upload speeds can make a huge difference for applications such as Skype or FaceTime since video is traveling in both directions—up and down—simultaneously. For high-quality (non-HD) video chats, I suggest adding about 0.5Mbps of upload bandwidth or about 1.5Mbps for full HD.

Your upload bandwidth also comes into play when you or others are remotely accessing devices or files on your network when you’re away from home. It’s hard to suggest a fixed number on that activity, though; just remember the faster the upload speed, the faster the file transfers and streams will be coming from your network.

Monitor your usage to identify bandwidth hogs

Whether you have a data cap or are having performance issues, consider tracking the bandwidth usage of all your devices to see who or what is hogging the most bandwidth.

You might consider using a Windows-based program like BitMeter OS (free and open-source) or NetWorx (also free), which are most useful if all or most of the Internet devices on the network are Windows PCs or laptops. These applications will track usage over time for the particular computer they’re installed on, and offer up graphs and tables of data you can review. You can also set a data quota and be alerted when a device approaches or exceeds that limit.

Networx

NetWorx provides detailed bandwidth reports, but only for the PCs on your network.

If you’re using multiple types of devices on the network—smartphones, tablets, gaming consoles, and TVs, in addition to computers running Windows—it would be ideal to track the entire network’s bandwidth from a single point, so you don’t have to setup tracking on each device. Since the Internet traffic of each device needs to be monitored, it’s not as easy as installing a simple program on a PC. The traffic must be monitored from the router or another device strategically placed between the Internet connection and the network clients.

Although most routers don’t track bandwidth consumption by network device, consider checking yours just in case. If your router doesn’t support it, consider buying another router or flashing a supported router with aftermarket firmware that does support it. If you decide to buy a new router, the enterprise-oriented Open Mesh routers and access points provide quite a bit of bandwidth usage details. Their hardware can be managed via a free online account. and it supports wireless mesh-networking technology that makes it easier to broaden your Wi-Fi coverage.

Open Mesh network

Open Mesh shows a graph of bandwidth usage of each client, top clients, top devices, top applications, and top APs on its Network Overview page.

If you don’t want to replace your router, flashing it with aftermarket firmware is a good option, provided your router has that capability.DD-WRT is one popular aftermarket firmware that supports many router brands and models; but by default, it shows only your total bandwidth usage. To find the usage per client or device, you’d also need to install an add-on like DDWRT-BWMON.

Cucumber Tony is a lesser-known firmware to consider. I reviewed it for TechHive's sister site NetworkWorld recently and found that it supports a couple of different router brands. Gargoyle is another firmware you might not be familiar with. It offers some good bandwidth monitoring and control functionality, with support for a few router brands.

For the more adventurous, another option is to build your own router out of an old or spare PC, or even run it on your main PC with a virtual machine. Sophos UTM and Untangle, for instance, are operating systems that provide routing, firewall, web filtering, bandwidth monitoring, and many more network functions.

Cucumber

Cucumber Tony shows a graph and table of each device’s bandwidth usage on the Clients page.

Utilize your router’s QoS to distribute bandwidth

Most routers have a quality-of-service (QoS) feature, but it’s not enabled by default on some routers. The idea behind QoS is to regulate bandwidth usage in a way that ensures good performance on the network, particularly with more sensitive types of services such as video streams, VoIP calls, and online gaming, where any lag can be quite noticeable. It basically gives these types of traffic higher priority—on the network and to Internet access from the network—compared to services that aren’t sensitive to lag (e.g., file downloads, torrents, software updates, and general web browsing).

The exact QoS features and settings vary between by router brands and models, but most provide a way for you to give particular devices higher priority by tagging their MAC or IP address, or by marking types of services for higher priority. Some routers come with a collection of default QoS settings that you can tweak and customize.

Login to your router and see if it has any QoS settings. Take a look at the default settings, as it might already give the most common services higher priority. If not, see if it allows you to classify traffic based upon the service type. I suggest going that route first to help alleviate any performance issues on the network. Secondly, you could consider prioritizing any critical devices you’d like to have higher priority.

Netgear QoS

This Netgear WNR2000 802.11n router has QoS pre-configured for a limited number of applications, but you must configure your own rules for anything the manufacturer didn’t think of.

Optimize your network to increase speeds

At first thought, your Internet connection seems to be the bottleneck to the Internet. Your local network might be able to handle up to 1000Mbps of bandwidth, while your Internet-download speeds are likely less than 60Mbps (much less than that if you’re relying on DSL or—shudder—satellite Internet service). You’d think that your network could easily handle it, but sometimes that’s not the case. This is especially true when you have many devices on the network, particularly Wi-Fi devices.

You might not need super-fast speeds for every device or online service, but the quicker any device is served by the router means the more time it has to serve the other devices on the network. Thus, increasing the speeds of just one device could have an impact on the others. The more devices you get faster, the more noticeable the increased performance may be, especially for those sensitive services.

Whenever possible, connect computers and devices to the router or network via an ethernet cable. This helps alleviate the congestion on the airwaves, which is a much more complex and imperfect connection medium than a cable.

For devices that can’t be hardwired, try to utilize router’s 5GHz frequency band as much as possible, as the 2.4GHz band is much more congested and prone to interference. For network clients that can connect only to your 2.4GHz network, check channel usage so you can use the least-crowded channel available. Additionally, ensure you’re using only WPA2 security for your Wi-Fi, as enabling the first-generation WPA (or the even older, insecure WEP) limits wireless speeds.

If your wireless router doesn’t support 5GHz, I suggest upgrading to a dual-band router so you can utilize these faster and higher quality frequencies. Keep in mind, the Wi-Fi devices must also specially support 5GHz, otherwise they’ll still be connecting via 2.4GHz. For computers and devices that can be upgraded to 5GHz Wi-Fi, I suggest doing so. If you have multiple devices without 5GHz, I suggest upgrading the ones with any performance issues first.

Finally, evaluate your Wi-Fi coverage to ensure that your wireless router is placed in the most central spot around where you use the wireless devices most often. If you still regularly have low or poor Wi-Fi signals, consider extending your network.

This story, "How to monitor, measure, and manage your broadband consumption" was originally published by TechHive.

Shop Tech Products at Amazon